Narrowband UVB Home Phototherapy Equipment for Psoriasis, Vitiligo & Eczema

SolRxTM 1000 Series Home Phototherapy
Full Body Panel  (6-feet high)

Design Concept

PAGE:   1   2   3   4   5   6   7   8 
Selection Guide    Ordering Info

The bulbs are designed to be as close to the floor as possible, minimizing the need for you to stand on a platform to treat the lower leg.

Another important feature of the SolRx 1000 Series Full Body Panel is that the bulbs are as close to the floor as absolutely possible, minimizing the need for you to stand on a platform to treat the lower portion of your legs. Most competitive units are raised up much higher from the floor, making a platform almost mandatory for many people.

This picture shows that the dimension from the bottom of the fluorescent tube glass to the floor is only about 2 inches.


Four heavy duty rubber bumpers rest on the floor.
The bottom of the unit has four heavy duty rubber bumpers to rest on the floor. It is acceptable for the device to rest on a carpeted floor.


There are no special electrical requirements.
The device uses a standard 3-prong grounded wall outlet available in most homes in North America.
(120 Volts AC, 60 Hertz, single phase, NEMA 5-15P plug)
There are no special electrical requirements.


Two simple brackets fasten the device to the wall.
The device is usually mounted flat-to-wall using the two brackets shown. Two screws and two drywall anchors are supplied to make the connection. It is not necessary that the screws be fastened to a wall stud since the unit's weight is entirely on the floor. The brackets basically only keep the unit from falling forward. It is important that they be installed.


The mounting brackets are simply rotated into position when needed.
The mounting brackets are permanently fastened to the top of the unit at the back, and are simply rotated into position when needed. The device can also be mounted in a corner using the mounting brackets on the angled portion of the endplate.


Top quality hand assembly. Shipped fully assembled.
The device is hand assembled using plated machine screws with nylon insert locknuts wherever possible. These locknuts ensure that the joints stay tight and the unit retains rigidity. The device is shipped fully assembled.


The SolRx 1000 Series is built to last.
The result is a durable product with compact dimensions and reasonable weight. One person can normally handle the unit, grasping it from behind as shown. However, it is preferred that two persons handle it, one at each end. If care is taken, the device can be moved with the bulbs in place.





Physician approval / prescription is required for all ultraviolet home phototherapy device and UV bulb orders.

Solarc Systems Inc., 12 Parker Court, Barrie, ON, Canada L4N 2A6
Toll Free: 1.866.813.3357   Tel: 705.739.8279    Fax 705.739.9684



  ©2008 Solarc Systems Inc.
info@SolarcSystems.com Solarc Narrowband UVB Home