|
|
SolRxTM
E-Series Multidirectional Phototherapy
ExpandableTM 2-Bulb Full Body Panel System
6-Foot Models: E720M(Master) & E720A(Add-On)
Optional Face-Shield Kits
Face-Shield-M & Face-Shield-A
|
Technical Data
More Photos
|
|
The Face-Shield is an OPTIONAL
accessory for
E-Series MASTER and ADD-ON devices.
It is used to reduce the amount of ultraviolet light delivered to the patient's face,
The Face-Shield is suggested for patients that:
A) do not need treatment on their face, or
B) in their lifetime have received significant amounts of natural sunlight on their face.
The Face-Shield is made from thin ultraviolet-blocking grey-tinted plastic film,
and is quickly hung in front of the device from the two hooks on the top left and right corners of the upper endcap.
The hooks are supplied standard with all MASTER and ADD-ON devices, so there are no additional parts to assemble.
In this picture, the Face-Shield is shown hanging down to cover the upper 15 inches of the top of a MASTER device.
The lit bulbs can still be seen behind the Face-Shield because,
while the Face-Shield film is nearly 100% UV-blocking,
it still transmits most of the visible light.
IMPORTANT: The Face-Shield is NOT a substitute for wearing of the UV-blocking goggles supplied with the device.
While the Face-Shield film is nearly 100% UV-blocking,
there is still ultraviolet light transmitted to the eyes from around the perimeter of the Face-Shield and
from the lower portion of the device.
NOTE:
The Face-Shield is NOT necessary for effective use of the device.
Alternative methods to reduce the amount of UV light to the face are for the patient to:
A) stand on a stool during treatment, to elevate the face above the top of the device; or
B) use an opaque material to block the face, such as a ski mask; or
C) use sunscreen.
|
The MASTER device's Face-Shield (part number
Face-Shield-M)
has a large rectangular hole for access to the timer and switchlock.
|
The ADD-ON device's Face-Shield (part number
Face-Shield-A)
has only two hanging holes in the top corners.
|
Face-Shields can be easily cut with scissors to reduce their coverage.
Face-Shield shipping is included if ordered at the same time as a device,
so we can package the Face-Shield within the device box.
|
In this picture, the Face-Shield can be seen at the top of the device.
Some people may ask: Why not just use a 4-foot high device?
The short answer is that 6-foot bulbs (Philips TL100W/01) are 100 watts each,
whereas 4-foot bulbs (Philips TL40W/01) are only 40 watts each.
See also the question "Does Solarc make any 4-foot high devices?" in our
Frequently Asked Questions.
|
|
|
Solarc Systems Inc., 1515 Snow Valley Road, Minesing (Barrie), Ontario, Canada L0L 1Y3
Toll Free: 1.866.813.3357 Tel: 705.739.8279 Fax 705.739.9684
|
|
|
|
|
