|
|
Narrowband UVB Home Phototherapy Equipment for Psoriasis, Vitiligo & Eczema
SolRxTM 1000 Series Home Phototherapy
Full Body Panel (6-feet high)
Product Features: Timer, Switchlock, Electrical
|
PAGE:
1
2
3
4
5
6
7
8
Selection Guide
Ordering Info
|
|
The controls for the
SolRx 1000 Series Full Body Panel
are simple and straightforward, as confirmed by an
independent medical study
which stated:
"Twenty-three patients (92%) felt that the ease of operation of the home unit was high,
and only two patients said that it was average."
A
digital countdown timer
provides dosage control to the second, and has a maximum time setting of 20:00 minutes:seconds.
A particularly useful feature of this timer is that
it always remembers the last time setting
,
even if power is removed from the device for a long period of time.
This means that you will always have your last treatment time setting for reference.
The time is set by simply pressing the up or down arrow keys,
and the lights are turned on/off by pressing the START/STOP button.
The lights turn off automatically when the timer counts down to 00:00.
The timer's red display is easily seen through the patient goggles supplied.
The timer does NOT require prescription refills from your physician.
The timer's output relay carries a UL-508 [NEMA-410] ten Amp (10Amp) "Ballast" rating
and has been tested by Solarc in a 1790 (8 Amps) for over 30,000 on-off cycles -
that's 2 treatments per day for 41 years.
The timer is top quality, UL/ULc certified, and made in the USA.
A
keyed switchlock
is the main power disconnect for the device.
By removing and hiding the key,
unauthorized use can be prevented.
This is an important feature,
especially if kids are around,
because mistaking this medical UVB device for a UVA tanning machine can have serious consequences.
The labels are made from Lexan® and will not fade.
|
The back cover is held by 12 screws and can be removed to expose the electrical components.
The power supply cord is very long; about 9 feet (2.7 meters),
minimizing the chances that you will need an extension cord.
|
With the back cover removed, you can see, from the top: the timer, switchlock and ballasts.
(4 for this 1780UVB-NB)
Commercially available electronic ballasts are used to minimize weight.
All components are readily serviceable with common tools.
Every device is evaluated by a 3rd party electrical inspection agency accredited by the Standards Council of Canada.
|
For maximum durability, the frame is made from 20 gauge steel (about as thick as a dime)
and then powder painted white to create a beautiful, long lasting finish.
There are a minimum of plastic parts to age, crack and break.
|
Physician approval / prescription is required for all ultraviolet home phototherapy device and UV bulb orders.
Solarc Systems Inc., 12 Parker Court, Barrie, ON, Canada L4N 2A6
Toll Free: 1.866.813.3357 Tel: 705.739.8279 Fax 705.739.9684
|
|
|
|
|
